User Interface

Simply refined, simply beautiful

Following in the footsteps of the original NavNet TZtouch, TZtouch2 features a refined user interface that is all about usability.
Whether you are searching for hot fishing grounds, plotting your next route, using your Radar to navigate through the fog, you can expect smooth operation with familiar touch gestures.

New Graphical User Interface

You can “Edge Swipe” from all four sides to access various options. Swiping from the left of the screen reveals the NavData panel, where you can customize contents to simplify navigation and chart usage. You can set the autopilot, check tide information and much more. Swipe down from the top of the screen and display page options drop down for quick and easy access. Swipe the right side to view contextually appropriate menus, and swipe from the bottom for chart and data layer options. Rather than digging through menus, all of the important options are now just a swipe away.

Click the icons to activate the Edge Swipe gesture.

Swiping from the left of the screen reveals the NavData panel, where you can customize contents to simplify navigation and chart usage. You can set the autopilot, check tide information and much more.

Swiping your finger down from the top edge of the screen displays the Quick Page. As the name implies, the Quick Page allows you to quickly change between the different screens from your current display. With bold colors, the previews are easy to differentiate and quickly choose from.

One of the new features is the layers menu, just swipe up from the bottom edge of the screen. The layers menu is a practical way of changing settings on the fly without having to venture into deeper menu systems. Since the screen is visible at all times, understanding and using the different settings becomes a breeze.

The slide-out menu provides quick and easy access to often-used functions, and is available in every mode.

Home Screen

The new home screen, with its bright and crisp graphics, is easy to understand and operate. The colors and icons have been carefully chosen to provide maximum visibility, allowing you to know instantly which screen is displayed, just by seeing the color and icon. Changing to different display screens is just a simple matter of dragging and dropping.

Fully Customizable

Arrange instruments by the touch of your finger. You are free to customize the display to precisely fit your unique needs. Also note that instruments can overlap each other, giving you even more space to work with.

Instruments

The instrument page is impressive just on its own rights, but where it really shines is it's customizability. No matter if it is for navigation, engine and tank monitoring, autopilot control or all together, data can be displayed according to your personal tastes and needs.

CZone Digital Switching

CZone digital switching simplies the installation and operation of complex electrical systems. Change effortlessly from Dock Mode to Cruising Mode with a single press on your iPad, remote Keyfob or directly from your Navnet TZtouch2 display.

Learn more about CZone Digital Switching at www.czone.net


  • CZone Control & Monitoring

  • CZone, engine, navigation and various NMEA2000 data can be laid out on the same screen.

Manual Fuel Management*

NavNet TZtouch2 calculates and displays the remaining fuel based on the manually entered tank capacity, as well as fuel consumption information from NMEA2000 network.
The gauge allows the user to evaluate precisely the fuel level without equipping the ship with a fuel gauge. The NavNet TZtouch2 gives you the low fuel alarm when the fuel runs out.

* 1) NMEA 2000 PGN127489 (Fuel Rate) input is required.
  2) While the engine is running, at least one TZTL12F/TZTL15F in the network should be always turned on in order to keep calculating the fuel consumption.
  3) The fuel indication may be inaccurate if the values entered are not correct, or the fuel rate sensor is not functioning correctly.


  • Data box

  • Manual Fuel Tank display in Instrument mode

*All new functions require software v4.01 or later.

eGuide



With an internal eGuide you never have to worry about losing your manual ever again. Simply open the eGuide from your NavNet TZtouch2 and you can study the different functions and menus in great detail. With helpful tips and tricks along the way, you will master your new NavNet TZtouch2 in no time at all.

Remote Control Unit MCU-004 and MCU-002

The new MCU-004 features a rotary knob as well as a fully articulated joystick for smooth and simple operation, even in heavy seas. Take full control over your NavNet TZtouch2 together with the edge-swipe key, making swipe menu selection accessible. You can switch active display as well, with the push of a button.

MCU-002 is a compact, waterproof and with a small footprint that is easy to install and operate anywhere on your vessel. The Remote Control Unit works as a supplement to the multi touch operation of NavNet TZtouch2.

TOP